■PPS (Poly Phenylene Sulfide) |
|
|
・ |
Superior heat resistance allows use at up to around 200°C, with some variation due to conditions etc. |
・ |
Chemical resistance allows use with most solvents at up to 200°C. |
・ |
Fire retardant, with superior fire resistance |
・ |
Corresponding wire diameter: From Φ0.15 |
|
|
・ |
Superior heat resistance allows use at up to around 260°C, with some variation due to conditions etc. |
・ |
Superior chemical resistance allows use with most solvents. |
・ |
Slipperiness (detachability) and non-adhesion are also superior. |
・ |
Corresponding wire diameter: φ0.1, 0.15, 0.3 |
■Conex (meta-aramid resin)
|
|
|
・ |
Superior heat resistance allows dry use at up to around 200°C, with some variation due to conditions etc. No bonding due to frictional heat |
・ |
Chemical resistance is stable against alkalis and weak acids |
・ |
Superior rigidity maintains excellent fiber stiffness and reactivity up to high temperature ranges. |
・ |
Can handle use with abrasive particles |
|
|
・
|
An organic conductive fiber with copper sulfate chemically bonded to acrylic fibers |
・ |
Specific resistance (according to manufacturer labeling): 10-0 to 10-1 Ωcm (10-1 is 10 to the power 1) |
|
|
・
|
A fiber with added carbon black, as a conductive material based on nylon 66 |
・ |
Volume-specific resistance value (according to manufacturer labeling): 10-3 to 10-5 Ωcm (10-5 is 10 to the power 5) |
・ |
Corresponding wire diameter: From Φ0.1 |
|
|
・
|
A fiber with a uniform coating of Ele-bye emulsion on the surface of nylon |
・ |
Electrical resistance value (according to manufacturer labeling):
φ0.2 5x105 to 3x106 Ω-cm
φ0.3 3x103 to 7x103Ω -cm |
・ |
Corresponding wire diameter: φ0.2, 0.3, etc. |